Replying to
@shlee@aus.social that feels like high yield nuclear weapons grade payload in a corporate environment. I need to remember this.
Remote
#worldisfukt / telecomms / networking / fighting / travel / photography
runneth up on thee for informal combat
@reldredrants@twitter.com@social.bcicorporate.com
runneth up on thee for informal combat
@reldredrants@twitter.com@social.bcicorporate.com
55 Followers
28 Following
50 Posts
Open post
i've been through a long period of my life where i'd rather hold my tongue then get bogged down telling idiots they need to shut the fuck up, but now I'm circling back around to the opinion that I need to tell people they're full of horse shit and need to shut the fuck up more often
4
2
1
0
Open post
slowly relearning how to be a functioning human being
4
0
0
0
Open post
the funny American numbers make my weight loss seem a lot more impressive, I could say I’ve lost 43kg, or I could say I’ve ’nearly lost 100 pounds’
4
2
0
0
Open post
the novelty of airfryer hasn't worn off yet
2
2
0
0
Open post
i am glad my old steam controller made the move up here, there's a lot wrong with it as a controller which I'm looking forward to the new one fixing, but it is quite good regardless.
2
0
0
0
Open post
hmm, bluetooth audio seems fixed in kubuntu 26.04 as well. I was pleased my mouse was working properly but audio on top of it is a nice improvement.
1
0
0
0
Open post
sigh, I need to buy more clothes. Shit I literally bought like a few months ago that was tight on me is now getting loose. My undies are all wayy too big now as well 😭
1
1
0
0
Open post
I need to find some better frozen pies, the stuff coles and the local iga carry have gotten a bit meh
1
1
0
0
Open post
I think I definitely need to put a cheap stereo system under the house though
1
0
0
0
Open post
stainless workbench is setup downstairs and the resin printer and the wash/cure station are setup down there as well. Cant do much with it til next week when the resin and the IPA etc. all rock up but it's nice to start to turn that downstairs area into a working area. I think though I need to get a decent sized industrial fan to keep dust from settling (I've got a little mini greenhouse tent over it for the time being), and I should probably get a small leaf blower/vac so I can keep the area clean.
1
0
0
0
Open post
Replying to on social.bcicorporate.com
well i've done most of the capsman configuration, though I really need to create a new vlan to use for capsman provisioning but ehhhhhhhh its a whole ass thing to setup a new vlan on the piece of shit dell switch and then trunk it through to the proxmox cluster and then reconfigure my chr vm with another interface and probably the most egregious thing of all of it is I need to make my mind up what vlanid to actually use
1
1
0
0
Open post
Went for a long scooter ride through the city and all I took photos of was the bisexual lighting bridge
1
0
0
0
Open post
Replying to
config wasnt too bad, about the usual problem is the config pages/folders in the terminal tree might have three dozen different options but you only need like three of them
1
0
0
0
Open post
Replying to
bought the stainless work bench the printer will go on, ordered a cheap little pvc greenhouse that's big enough to stick on top and keep the dust off the printer and the wash/cure station since this is gonna go under the house. just need to get the big 5L bottle of IPA, and then ideally buy the WAP's though tbh I can just run back and forth with a USB stick if need be for now.
1
0
0
0
Open post
WFH day this morning, making a choccy croissant in the air fryer while fixing my breakfast cereal was nice, I've got a little bit of a view out into wooloongabba from my kitchen window, though most of it is blocked by the giant shed they've built covering the new train station building site. A nice morning. Now I sit and drink my can of monster.
1
0
0
0
Open post
Replying to
@brett@brettiverse.com Something I need to learn as well. Either that or just merge miniatures in blender before resin printing them...
1
0
0
0
Open post
thinking I might just go another mars 5 ultra and save the few hundred bucks difference on the Saturn 4 16k, I’m realistically not gonna need the bigger bed size since I tend to only print smaller scale parts and big stuff I do on an FDM printer, plus I know the mars5ultra really well since that’s what I used to use back in Adelaide. I can save the difference and get a really nice stainless steel workbench to stick under the house and then the big issue I had working at my old place (enough room to put the damn bucket lid beside the printer when working on it) isn’t an issue since I’ll have way more working space. That at least gets me back to printing a lot sooner, and I can always flog the machine to someone else and buy a bigger one in 6-12mo time when my finances are a lot more permissive than they are now
1
0
0
0
Open post
Replying to
@maid@shitposter.world no not even any implements, I will tear the flesh off their skull with my bare hands.
1
1
0
0
Open post
god i shouldn't bother trying to get to bed before midnight on a saturday night here if it's a long weekend, shit was going crazy, carcrashes in the back alley behind my house, people screaming and carrying on all night, lmao
1
0
0
0
Open post
Replying to
workshop, lol, as if there's only gonna be one in this house
1
0
0
0
Open post
Replying to
@brett@brettiverse.com pretty sure they'll get upset if you just go outside and take a whole kangaroo
1
1
0
0
Open post
Replying to
@brett@brettiverse.com on the other hand, big chest freezer, plenty of steak to last a while. Gotta use all of it.
1
0
0
0
Open post
Replying to
@newmodel@shin.mugicha.club i mean i'm even getting to the point nowadays where i'm not even opposed to an ARM device, the only vidya i generally play on something like this are O/S games anyway.
1
1
0
0
Open post
Replying to
@newmodel@shin.mugicha.club eh I mean they're a good device but they have their own quirks and issues. My main use case is I want something small that fits in a handbag that when I'm lurking at a datacentre for hours waiting for something to happen I can do like most of my desktop ish things. Built in LTE, half decent keyboard, and like 10"ish in size is basically the main criteria.
1
5
0
0
Open post
i need to buy the other matching L shaped desk for my office so I can make room for another monitor, and also you know retire another folding camp table thats currently holding up my stereo system, my little mini cluster (though that's also waiting on a proper rack), and my other random projects in progress lmao
0
0
0
0
Open post
i need to find a compact little usb-c charger with at least like 30-60w capacity to keep in my handbag hmmm
0
1
0
0
Open post
Replying to
i also need to decide which room is gonna be the 'workshop', hmm, i have a spare bedroom but it's carpeted and i don't really wanna be doing shit that's gonna make a mess there it'll be an absolute right twat to clean up, but i don't really need room audio syncing if i setup a desk in my living room or dining room
that said the dining room is probably gonna be the games room/etc. since at my last place the only time i ever sat at the dining room table was with frends to play battlefleet gothic lol, i'll probably setup the living room to be the lounge though i wanna avoid getting a tv as much as i can.
0
0
0
0
Open post
i really do need to upgrade these speakers it really doesn't take much for them to start falling apart at higher volumes
0
1
0
0
Open post
I need to get a cool rain jacket or poncho now that I live in damp sub tropical paradise, I got caught in my first proper squall the other day riding a scooter back from the orifice.
0
0
0
0
Open post
Replying to
@maid@shitposter.world eh, it's not a super common technique but it does get used a bit
0
0
0
0
Open post
Replying to
and really the gpd wm2 is fine but the lte sucks and the case is this obnoxious shade of not quite silver not quite rose gold coloured, which is unacceptable all my devices need to be black and scary looking
0
7
0
0
Open post
uuuuuughh i am sore and tired. stayed up too late last night and was racking things today
0
0
0
0
Open post
well, seems like I can still drive this model printer pretty good, print came out looking nice, my technique for getting the plate off and scraped off into the wash tank still works without making a mess, and the stainless workbench I got is working nicely too. One thing I’m annoyed about is I forgot to get a glass jar to do wet cures in. Guess I’ll have to let these parts air dry (which should be easy since I’m using IPA instead of detergent now), then do a traditional cure. Definitely want to swap back to water curing though that shit worked fantastic before.
0
0
0
0
Open post
my first foray into using an air fryer has resulted in surplus BCB's, but I do at least appreciate that it's not a soggy mess. I can work with this.
0
0
0
0
Open post
My dietary plans are ruined if I can just air fry a meat pie any time I want one with minimal financial incentive not to
0
0
0
0
Open post
dropped my exposure time from 2.1 to 2s but slightly bumped up some of the other wait times and the problem I now have is it's very hard to make out the slight release 'bounce' that the plate does from the webcam, overall that's probably good as it means less pulling forces on the print potentially stretching and warping them, but it does make it hard to tell visually whether I have adhesion or not
0
0
0
0
Open post
Replying to
@newmodel@shin.mugicha.club nah, separate keyboard is a hard pass on this criteria unless it's something like a surface, lenovo x12 where it magnetically attaches to the unit. Even then I prefer something like the GPD where I can actually put it on my lap to a convertible 2in1 tablet.
0
1
0
0
Open post
vidya game being busted probably isn’t the worst thing in the world (haven’t decided whether I’ll chase a refund or not), gives me more motivation to do things away from the pooter, or, do things on the pooter that support my off pooter activities. Need to finish up those thunderhawks tonight and get them printing I reckon.
0
0
0
0
Open post
Replying to
@newmodel@shin.mugicha.club basically what I want largely doesn't exist outside of what I've already got or used, I'm just pissy about it.
0
1
0
0
Open post
crisp cold can of monnie out of my own fridge. life isn't so bad.
0
0
0
0
Open post
Replying to
i should see if any of the dining tables at ikea tickle my fancy, i didn't really like most of the options when i last looked about 12mo ago
0
0
0
0
Open post
Replying to
@shibao@shitposter.world if americans had any backbone they'd be going london ulez bladerunner on that shit but nope
0
0
0
0
Open post
Open post